The Student Robotics kit is lent, free of charge, to each team and consists of various modules designed by us along with some ancillary parts to allow easy use of the modules.
We provide modules, known as ‘boards’, in each kit. These modules can be plugged together and as a whole form the basis for controlling your robot. The boards provided are as follows; more details can be found on their individual pages.
The kit can be controlled over WiFi. You can use any device to connect to the WiFi.
As well as the aforementioned boards the kit also contains the following items.
|Battery Charger Supply||1||12V 5A||N/A|
|Battery Charger||1||iMAX B6 or HobbyKing E4||N/A||Documentation is available on charging the batteries using this|
|USB Hub||2||7-Port||StarTech ST7202USBGB||The hub does not require a power cable|
|USB WiFi Adapter||2||300Mbps Mini Wireless N USB Adapter||TP-Link TL-WN823N|
|USB Memory Stick||1||Kingston Datatraveler G2 2GB or G3 8GB||N/A (discontinued)|
|Standard USB cable||3||Standard USB A to B connector||N/A||For connecting the ruggeduino (via a hub) and USB hubs to the ODROID|
|Micro USB cable||5||Standard USB A to Micro USB B||N/A||For connecting the motor boards, servo boards and power board to the ODROID|
|Red Hook-up Wire||1||2.5m
|RS 361-614||General purpose wire|
|Black Hook-up Wire||1||2.5m
|RS 361-579||General purpose wire|
|Blue Hook-up Wire||1||2.5m
|RS 361-585||General purpose wire|
|Yellow Hook-up Wire||1||2.5m
|RS 361-636||General purpose wire|
|Blue Power Wire||1||1.8m
|RS 361-721||To connect motors to the motor boards|
|Red Power Wire||1||1.8m
|RS 361-759||To connect power from the power board to the motor/servo boards|
|Black Power Wire||1||1.8m
|RS 361-715||To connect power from the power board to the motor/servo boards|
|Farnell 3882275||To connect 12V from the power board to the motor and servo boards|
|Farnell 3881854||To connect motors to the motor boards, and to connect an external power switch|
|Farnell 1717047||To connect a 5V component to the power board or to connect an external start button|
|USB Webcam||1||Either Logitech C500 or Logitech C270||Ebuyer 230435|
|ODROID Power Cable||1||DC Plug and Cable Assembly with MicroCamCon||G138960965859|
|Battery (LiPo)||2||11.1V 2.2Ah Lithium Polymer||N/A||Please read the documentation for storage and usage information|
|Battery Bag||1||HPI Plazma Pouch Lipo Safe Bag (18x22cm) or Overlander Lipo Safe Sack||HPI 101289 0000153||Batteries should always be stored in the battery bag|
|Screwdriver||1||Duratool Precision 2.5mm Slot Screwdriver||Farnell 2103271|